HOME >> Mechanical Industry >> Sealing Element
first prev 1 2 3 4 5 6 7 8 9 10 next last

    • Qiang Sheng QS-3051 Inner and outer Ring of SWG

      Specification: Description:QS 3051 also can be processed for inner and outer ring of spiral wound gasket. We make the inner and outer ring by punched for size small then 14 inch, and by lathe for large sizes. If some material is costly, for example SS304, SS316 etc., we can make it by bending and welding with low cost, if the seal face is narrow. CONSTRUCTION: QS 3051 is machined from solid metal sheet in a round shapes and designed for high pressure, high temperature or highly corrosive applications by selecting the most suitable material. It is designed to withstand exceptionally high assembly loads over a small area QS 3051 also can be processed for inner and outer ring of spiral wound gasket. QS have enough homemade special groover and angling machines for making inner and outer rings of SWG with good efficiency and lower cost. AVAILABLE: Size: ASME B 16.20 1/2” to 24” 150LB, 300LB, 600LB Other Sizes or standard on request Materials: Carbon Steel, with or without zinc coating SS304, SS304L, SS316, SS316L Other special materials: SS321, SS317L, Duplex 31803, Ti, Ni, Inc, Hast. Monel, Zr. etc ORDERING EXAMPLE: Inner and outer ring , Material: SS304 2” 150LB

      • Inner and outer Ring of SWG SWG gasket

    • Qiang Sheng QS-3060 Reinforced Graphite Gasket

      Specification: Description:It is made from graphite as homogeneous, reinforced by metal mesh, foil or tanged metal. It offers excellent sealing capabilities such as thermal stability, self-lubrication, corrosion resistance, without being brittle and aging etc., under extreme conditions with a longer life and less maintenance. Recommended style is QS-3060 QS GrafoilTM Graphite Gasket Gasket Style 3060A 3060B 3060C 3060D Without eyelet G3060A G3060B G3060C G3060D With inner eyelet G3060IR G3060P IR G3060T IR G3060M IR With outer eyelet G3060CR G3060P CR G3060P CR G3060M CR With I&O eyelets G3060IC G3060P IC G3060T IC G3060M IC Insert material None SS304,316etc SS304,316,CS CS,304/316 Foil Tanged Mesh 0.05mm 0.1mm,0.25mm-CS 0.1mm APPLICATION&PROPERTIES: Various shapes are available, used in petrochemical, mining, vessels, boilers, piping and duct, pumps and valves, flanges etc. Suitable for steam, mineral oils, heat transfer oils, hydraulic oil, fuel, water, seawater, freshwater etc. Sheet Style 3060A 3060B 3060C 3060D Compressibility 30% 15~35% 15~35% 15~35% Recovery ≥10% ≥20% ≥20% ≥20% Pressure 40bar 200bar 300bar 200bar Demsity g/cm3 0.7;1.0 1.0 1.0 1.0 Temperature0C -240~550 -240~550 -240~550 -240~550 PH 0~14 0~14 0~14 0~14 Graphite properties: Item Tolerance of density C≥% Tensile Sulphur Chlorine Stress relaxation Ignition loss Industrial ±0.06g/cm3 98 4Mpa <1000ppm <50ppm 10% 2.0≤% Nuclear ±0.05g/cm3 99.5 5Mpa <700ppm <35ppm 10% 0.5≤%

      • Reinforced Graphite Gasket Gasket seal element

    • Qiang Sheng Qiang Sheng Double Jacketed Gasket

      Specification: Description:QS Double Jacketed Gasket (DJG) is made from graphite, ceramic, non-asbestos etc. filler covered with thin metal jacket, such as stainless steel, carbon steel, copper etc. By their sealing efficiently, provide outstanding resilience, while the metal jacket guarantees excellent sealing and protects the filler against pressure conditions, fluctuating temperatures and corrosion 3061DJ Double Jacketed Plain Gasket 3061DC Double Jacketed corrugated Gasket 3061S DJG with Special Shape APPLICATION: QS DJG is particularly suitable for sealing flat surfaces of heat exchanges, gas pipes, cast iron flanges, cylinder heads of engines as well as for boilers and other vessels. By their sealing efficiently, provided by exerting strong pressure on circular rimes of the flanges, metal-jacketed gaskets can stand up to 30% deviation from the initial thickness, which is very useful in case of irregular or faulty flange rims. The chemical compatibility of the metal and the medium being sealed should be considered MATERIAL: Metal material Din Material NO. Hardness HB Temperature(℃) Density g/cm3 CS/Soft Iron 1.1003/1.0038 90~120 -60~500 7.85 SS304,SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316,SS316L 1.4401/1.4404 130~180 -250~550 7.9 Copper 2.0090 50~80 -250~400 8.9 Aluminium 3.0255 20~30 -250~300 2.73 Other special metal Ti, Mon 400 are also available on request. Materials for the insert: Flexible Graphite, ASB, Non-asb ceramic fiber, mica etc

      • Double jacketed Gasket gasket seal element

    • Qiang Sheng Qiang Sheng Kammprofile Gasket

      Specification: Description:QS KammprofileTMGasket (Serrated Metallic Gasket) consist of a metal core, generally stainless steel with concentric grooves on both sides. A sealing layer is usually applied on either side and depending on the service duty the material for this layer can be expanded graphite, PTFE, Asbestos free gasket sheeting materials or some soft metal. It can be used without sealing layers to provide an excellent sealing but there is a risk of flange surface damage especially at high seating pressure. 3040 Basic Type Kammprofile Gasket 3040 JR Kammprofile Gasket with integral Outer Ring 3040 SJ Kammprofile Gasket with Loose Outer Ring Depending on centering ring with cheaper material (Normal: CS) and thinner thickness (Normal: 1.5mm) for Style 3040 SJ, maybe it is more economical than 3040JR. APPLICATION: KammprofileTM gasket is the preferred gasket when improved performance at low seating stresses is required. It features excellent anti-blow-out properties linked with the reliably of a solid metal-to-metal seal combined with a soft sealing face to provide a tighter joint. It is particularly suitable for applications where high temperature, pressures and fluctuating conditions are encountered. Non-metal cover layers ensure that flanges are not damaged, even at extreme loads. This gasket is an ideal replacement for problem applications associated with jacketed gaskets, for heat exchangers, vessels and reactors and various flange connections. Pressure: (6.4~25Mpa) MATERIAL: Metal materia Din Material NO. HardnessHB Temp.℃ Density g/cm3 Thick.mm CS/SoftLron 1.1003/1.0038 90~120 -60~500 7.85 2 3 4 SS304,SS304L 1.4301/1.4306 130~180 -250~550 7.9 SS316,SS316L 1.4401/1.4404 130~180 -250~550 7.9 Other special metal is also available on request. Materials for the faces: Flexible Graphite, PTFE, Non-asb, etc. Normal with thickness 0.5 mm

      • Kammprofile Gasket Gasket seal element

    • HZMF HMFB-12 mechanical seal FB-12

      ear purchasing manager, Good day to you! We are Chinese seal manfacturer,we would like to introduce our company and products to you.Hope that we may build business cooperation in the future. We are specializing in the manufacture and export of mechanical seals for more than ten years.The following is our catalog of main products: 1,Auto-engine pump seals 2,O-ring rubber mechanical seals 3,Metal bellows mechanical seals 4,Classic mechanical seals 5,Chemical pump seals We have profuse designs with series quality grade,and expressly,we could promise you our price is very competitive,because we are manufacture,we are the source.If you like,please don`t hesitate to contact us. Thanks and Regards Bao Weili(sales director) Wen Zhou Heng Zheng Seal Manufacturing Co.Ltd Email/MSN,power584520(at)live,cn Tel:0086-577-86292688 Fax:0086-577-86292521 Web:www,hzmf,com

      • pump seals auto pump seal auto water pump seal

    • wealson w101 Flexible Graphite Sheet in Rolls

      W101C Automotive Grade flexibie graphite foil with carbon content of no less than 96.0%,no binders or fillers. W101B Standard Industrial Grade flexible graphite foil with carbon content of no less than 98% ; no binders or fillers. W101D Premium Grade flexible graphite foil with carbon content of no less than 99%with conventional inorganic passivating inhibitor for oxidation and corrosion resistance; no binders or fillers. W101Z High Purity Nuclear Grade flexible graphite foil with carbon content of no less than 99.85% ; no binders or fillers.

      • Graphite Graphite Products Gaskets and Seals

    • wealson w102 Flexible Graphite Tape

      W102S Graphite Tape:As the filler for spiral wound gasket, in-situ pump and valve gland packing,graphite packing rings,facing material for camprofile type gaskets. W102C Crinkle Tape:Graphite tape is rolled and corrugated into crinkle tape.It can be used for sealing of threads,flange,valve stems. W102H Graphite adhesive-back tape: It means graphite tape or Crinkle graphite tape with adhesive on one side. It is mainly used for sealing of threads,flanges.

      • Graphite Graphite Products Gaskets and Seals

    • wealson w104 Reinforced Graphite Sheet

      W104T Reinforced Graphite Sheet Tanged with SS304/SS316/Tin: A graphite laminate material mechanically bonded and available in 1000mm or 1500mm square sheets or cut gaskets. W104A Reinforced Graphite Sheet Adhesive Bond with SS304/SS316/Tin: A stronger graphite laminate material easy to cut on-site with scissors or knife and available in one metre square sheets or cut gaskets. They are all comprises two outer layers of graphite foil with a central tanged reinforcement material. The layers are mechanically pressed together in-house with a laminating technique that does not delaminate during punching, storage and use. Reinforcement material:SS304/SS316/TIN

      • Graphite Graphite Products Gaskets and Seals

    • wealson w201 Flexible Graphite Ring

      W201B Die Fored Graphite Rings:It is made of low-sulpher expanded graphite without any fillers or binders .They are compressed in precise moulding tools to the required density. Due to the high purity of the material (>99%), no special corrosion protection is required. In general, it has square section and also has V-shaped and wedge-shaped section, the rear two kinds style are suitable for high pressure sealing. W201R Reinforced Graphite Ringsn:. Moulded from pure flexible graphite with reinforcement, the insert materials stainless steel foil or mesh etc. are available on request. To protect against oxidation, the stainless steel cap is necessary.

      • Graphite Graphite Products Gaskets and Seals

    • wealson w202 Spiral Wound Gaskets

      Spiral Wound Gaskets are manufactured from a vshaped metal strip, spirally wound with an inlay of filler between each turn. Spiral wound gaskets are available in both standard and nonstandard designs W202J Spiral Winding Only W202N Spiral Winding with Inner Ring W202W Spiral Winding with Outer Guide W203L with Outer Guide and Inner Ring

      • Graphite Graphite Products Gaskets and Seals

    • Buna-n gasket

      Buna-n rubber/ NBR gasket Item:UG-110 NBR Features: 1) Available material: neoprene(CR, chlorobutadiene rubber), NBR, HNBR, VITION, FKM, PTFE, EPDM(ethylene-propylene-diene monomer rubber), natural rubber are available 2) All manufacturing processes confirm to ISO-9000, ISO2000 and international standards 3) Excellent chemical and physical property 4) Available in various sizes and colors 5) Customers' design and specifications are accepted

      • nbr gasket nbr rubber gasket oil-resistent rubber gasket

    • Buna-n gasket

      Buna-n rubber/ NBR gasket Item:UG-110 NBR Features: 1) Available material: neoprene(CR, chlorobutadiene rubber), NBR, HNBR, VITION, FKM, PTFE, EPDM(ethylene-propylene-diene monomer rubber), natural rubber are available 2) All manufacturing processes confirm to ISO-9000, ISO2000 and international standards 3) Excellent chemical and physical property 4) Available in various sizes and colors 5) Customers' design and specifications are accepted

      • nbr gasket nbr rubber gasket oil-resistent rubber gasket

    • UG-110 EPDM FDA certificated EPDM gasket

      FDA certificated EPDM gasket Item:UG-110 EPDM Uninovo Seal Co., Ltd. offer all types of EPDM rubber molded products and EPDM rubber extruded gaskets. We have more than decade working experience in handling projects for all applications in automotive, architectural aluminium, industrial, railway, bus body fabricator etc. We have engineering capabilities to offer solution which will fit your requirements exactly. Features: 1.It has excellent resistance to compressive stress relaxation at temperature 120 degree celsius and splitting or bursting under combined conditions of compressive strains upto 60% temperature -135 degree celsius. 2.It also has good resistance to ethylene glycol based engine coolants-1000 hrs at 120 degree celsius. 3.The material can successfully meet with heat aging requirement of 120 degrees for 1000 hours. 4.Gasket in EPDM rubber are widely used in a radiator 5.This material revealed no dimensional variation or deformation in a test which involved 30 mts in boiling water.

      • FDA certificated EPDM gasket EPDM gasket rubber gasket

    • UG-110 EPDM FDA certificated EPDM gasket

      FDA certificated EPDM gasket Item:UG-110 EPDM Uninovo Seal Co., Ltd. offer all types of EPDM rubber molded products and EPDM rubber extruded gaskets. We have more than decade working experience in handling projects for all applications in automotive, architectural aluminium, industrial, railway, bus body fabricator etc. We have engineering capabilities to offer solution which will fit your requirements exactly. Features: 1.It has excellent resistance to compressive stress relaxation at temperature 120 degree celsius and splitting or bursting under combined conditions of compressive strains upto 60% temperature -135 degree celsius. 2.It also has good resistance to ethylene glycol based engine coolants-1000 hrs at 120 degree celsius. 3.The material can successfully meet with heat aging requirement of 120 degrees for 1000 hours. 4.Gasket in EPDM rubber are widely used in a radiator 5.This material revealed no dimensional variation or deformation in a test which involved 30 mts in boiling water.

      • FDA certificated EPDM gasket EPDM gasket rubber gasket

    • CR SEAL GASKET

      CR / Neoprene gasket Item:UG-110 CR Specification: Neoprene gasket (chlorobutadiene rubber gasket, CR gasket, rubber gasket) We provide superior array of automotive rubber gaskets to our clients. Our collection is available in various designs and sizes to meet different requirements. The range is efficient to perform well even in extreme working condition. Further, our automotive rubber gaskets are also featured with resistance to heat, chemical and abrasion. Feature: 1)Main material: neoprene (CR, chlorobutadiene rubber) 2) All manufacturing processes confirm to ISO-9000, ISO2000 and international standards 3) Excellent chemical and physical property 4) Available in various sizes and colors

      • CR SEAL GASKET CR SEAL PARTS NEOPRENE RUBBER GASKET

    • CR SEAL GASKET

      CR / Neoprene gasket Item:UG-110 CR Specification: Neoprene gasket (chlorobutadiene rubber gasket, CR gasket, rubber gasket) We provide superior array of automotive rubber gaskets to our clients. Our collection is available in various designs and sizes to meet different requirements. The range is efficient to perform well even in extreme working condition. Further, our automotive rubber gaskets are also featured with resistance to heat, chemical and abrasion. Feature: 1)Main material: neoprene (CR, chlorobutadiene rubber) 2) All manufacturing processes confirm to ISO-9000, ISO2000 and international standards 3) Excellent chemical and physical property 4) Available in various sizes and colors

      • CR SEAL GASKET CR SEAL PARTS NEOPRENE RUBBER GASKET

    • Silicone rubber gasket

      Silicone rubber gasket Item:UG-110 SIL Specification: 1) Material: Silicone rubber 2) Widely used in automobile, electrical appliances and other industry 3) Any color and size available 4) Good function of sealing and attenuating shock 5) OEM orders are welcome

      • Silicone rubber gasket silicone rubber sheet rubber seal parts

    • Silicone rubber gasket

      Silicone rubber gasket Item:UG-110 SIL Specification: 1) Material: Silicone rubber 2) Widely used in automobile, electrical appliances and other industry 3) Any color and size available 4) Good function of sealing and attenuating shock 5) OEM orders are welcome

      • Silicone rubber gasket silicone rubber sheet rubber seal parts

first 1 2 3 4 5 6 7 8 9 10 last